Project Search
| price |
Click To Select
|
| code |
|
Browse Categories
White cottage playhouse
Project code: PC080712
Completed for: £5,489 inc. VAT
A very pretty looking playhouse built on a raised platform. There are two platforms set at different heights with the playhouse being set on the lower 4ft level. The right hand side platform rises to 5ft and gives a nice open area for playing and sitting out. The access between the two heights is a full width step which doubles up as a seat. There are two access points to the platform, one on either side. The playhouse has a central stable door with heart shape cut out, and two rectangular windows. The roof has eternite slate fitted and finished off with a scalloped facia, ridge board and sofit board. Internally the playhouse is lined with plywood. Underneath the higher platform a swing seat is fitted.
Click here to view a complete
printable technical specification
Superwhite
Dimensions
Playhouse: 7ft (213cm) wide x 5ft (152cm) deep
Height to eaves: 5 1/2ft (167cm)
Maximum height: 7ft (213cm)
Footprint: 16ft (487) wide x 8ft (243cm) deep + both staircases
Colours
Finished in sadolin superdec white
Specification
The following table gives the cost of this project with the various build options that are available, where the highlighted price indicates the cost of the project as featured on this page.
Click on the build options to see more details.
| Mineral Felt | Felt Shingles | Cedar Shingles | Slate Effect | |
|---|---|---|---|---|
| Option 1 | £4,769 | £4,873 | £5,159 | £5,220 |
| Option 2 | £5,038 | £5,137 | £5,429 | £5,489 |
| Option 3 | £5,456 | £5,555 | £5,846 | £5,907 |
Mineral Felt
High quality 38kg mineral felt over the top of base felt.
Felt Shingles
To give the appearance of tiles, these go over the base layer of felt.
Cedar Shingles
Traditional roof finish in North America, Cedar shingles are fitted over the top to the felt.
Slate Effect
Eternet artificial slate is fitted over the top of the felt, this look just like a traditional slate roof.
Option 1
Good quality redwood framework rounded on the edges and shiplap fixed to the outside using galvanised brads. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.
Option 2
All of option 1 with the addition of 6mm wbp plywood and a damp proof membrane between the frame work and the shiplap. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.
Option 3
All of option 2 with the addition of fitted insulation. The insulation fits within the frame and the plywood is attached to the inside giving a flat surface throughout the walls. The windows and doors are finished with architrave and skirting is fitted around the bottom. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.
Included accessories
Hanging swing seat
The build specification and accessories can be fully customised to meet your needs.
Please get in touch if you have some specific requirements.