The Playhouse Company

Chalet playhouse with spiral slide

Project code: PC080592

Completed for: £8,167 inc. VAT

Enquire Now

This very pretty chalet style playhouse has two levels with an internal staircase giving access from the ground floor to the first floor. To the left hand side of the playhouse is an external staircase, this leads up to a platform that wraps around the sides and rear of the playhouse, and also gives access to the side door on the first floor. The right hand platform has a telescope fitted to the balustrade rail and has been made wider to allow room for the children to sit, off this platform comes a open spiral slide.  The front ground floor of the playhouse has a central stable door with diamond shape cut out and a rectangular opening window either side of it. The right hand side has a set of shutter windows. On the first floor there is one rectangular window on the front, and a door with a triangular window above it on the left hand side. The roof is finished off using wooden cedar shingles.

Printer Click here to view a complete
printable technical specification

  • Clover Leaf
    Clover Leaf
  • Burlesque
    Burlesque

Dimensions

Playhouse: 10ft (304cm) wide x 8ft (244cm) deep (including 2ft (60cm) veranda)

Maximum height: 12ft (365cm)

Footprint: 24ft (731cm)  wide x 10ft (304cm) deep

Colours

Finished in Sadolin superdec: Walls and balustrade rails in burlesque. Door, windows and facia in clover leaf

Specification

The following table gives the cost of this project with the various build options that are available, where the highlighted price indicates the cost of the project as featured on this page.

Click on the build options to see more details.

Mineral FeltFelt ShinglesCedar ShinglesSlate Effect
Option 1£6,688£7,079£8,399
Option 2£7,227£7,612£8,701£8,937
Option 3£8,046£8,437£9,911£9,767
Prices shown are including VAT
  • Mineral Felt

    High quality 38kg mineral felt over the top of base felt.

  • Felt Shingles

    To give the appearance of tiles, these go over the base layer of felt.

  • Cedar Shingles

    Traditional roof finish in North America, Cedar shingles are fitted over the top to the felt.

  • Slate Effect

    Eternet artificial slate is fitted over the top of the felt, this look just like a traditional slate roof.

  • Option 1

    Good quality redwood framework rounded on the edges and shiplap fixed to the outside using galvanised brads. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.

  • Option 2

    All of option 1 with the addition of 6mm wbp plywood and a damp proof membrane between the frame work and the shiplap. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.

  • Option 3

    All of option 2 with the addition of fitted insulation. The insulation fits within the frame and the plywood is attached to the inside giving a flat surface throughout the walls. The windows and doors are finished with architrave and skirting is fitted around the bottom. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.

Included accessories

Stable doors

Stable doors

Shutter Windows

Shutter Windows

Open spiral slide

Open spiral slide

The build specification and accessories can be fully customised to meet your needs.
Please get in touch if you have some specific requirements.