Project Search
| price |
Click To Select
|
| code |
|
Browse Categories
Playhouse with veranda & trap door to ground level
Project code: PC051042
Completed for: £4,967 inc. VAT
This playhouse is raised in order to give a hide-a-way underneath. There is a 3ft veranda with roof overhang to the front and right hand side of the playhouse, this is accessed via an external staircase. The front of the playhouse has a door with a diamond shape cut out and one large rectangular window to the left of it, and the left hand side has a rectangular window. The hide-a-way has two unglazed windows and one small hatch door. Internally there is a trap door which gives another access point to the hide-a-way.
Click here to view a complete
printable technical specification
Teak
Mais
Lancelot
Dimensions
Playhouse: 10ft (304cm) wide x 7ft (213cm) deep
Height to eaves: 6 1/2ft (198cm) & 7 1/2ft (228cm)
Maximum height: 8 1/4ft (251cm)
Footprint: 13ft (396cm) wide x 10ft (304cm) deep + staircase
Height of platform: 3 1/2ft (106cm)
Total maximum height: 11ft (335cm)
Colours
Finished in sadolin classic: Walls in blue (lancelot): Doors and windows in yellow (mais): Balustrade rails and facia in brown (teak)
Specification
The following table gives the cost of this project with the various build options that are available, where the highlighted price indicates the cost of the project as featured on this page.
Click on the build options to see more details.
| Mineral Felt | Felt Shingles | Cedar Shingles | Slate Effect | |
|---|---|---|---|---|
| Option 1 | £4,967 | £5,346 | £6,424 | £6,650 |
| Option 2 | £6,550 | £5,940 | £7,012 | £7,243 |
| Option 3 | £6,468 | £6,848 | £7,920 | £8,151 |
Mineral Felt
High quality 38kg mineral felt over the top of base felt.
Felt Shingles
To give the appearance of tiles, these go over the base layer of felt.
Cedar Shingles
Traditional roof finish in North America, Cedar shingles are fitted over the top to the felt.
Slate Effect
Eternet artificial slate is fitted over the top of the felt, this look just like a traditional slate roof.
Option 1
Good quality redwood framework rounded on the edges and shiplap fixed to the outside using galvanised brads. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.
Option 2
All of option 1 with the addition of 6mm wbp plywood and a damp proof membrane between the frame work and the shiplap. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.
Option 3
All of option 2 with the addition of fitted insulation. The insulation fits within the frame and the plywood is attached to the inside giving a flat surface throughout the walls. The windows and doors are finished with architrave and skirting is fitted around the bottom. The floor is 18mm wbp plywood with a damp proof membrane on tanolised bearers.
Included accessories
Trap door
The build specification and accessories can be fully customised to meet your needs.
Please get in touch if you have some specific requirements.