Like this project? View simlar projects for more inspiration

A large playhouse with decking

Playhouse with veranda

Specification of this Large playhouse

Floor - Ground

Your playhouse comes with a solid floor all ready to be laid onto a sub base, this can be shingle stones/concrete/paving slabs/tarmac/decking. The floor is constructed using 25mm x 50mmm tanolised bearers supporting an 18mm wbp external grade plywood floor: this is treated on the upper side with sadolin classic timber protection.  Sandwiched between the bearers and plywood is a damp proof membrane that then wraps around the edge and sits under the playhouse side.  The membrane is there to stop moisture coming up from the ground.

A soft floor is fitted to the ground floor of the playhouse once finished - this floor can be removed easily for cleaning.

Roof - Slate

The playhouse roof is built to withstand the English climate; 75mm x 50mm bearers are put across from side to side. Screwed to these bearers is 12mm external quality plywood covered with two layers of waterproof membrane and then eternite slates fixed. These look just like real slate. The felt is wrapped over the front and back and sealed behind the facia board; there is also a ridge board fitted along the top ridge, these boards can be either straight or shaped.

Windows - Non-opening Glazed

The windows are built as separate units; once they have been sanded and treated they are glazed and then fitted and sealed using clear silicon into the frame. These windows are glazed with 2mm polycarbonate sheet, this is completely clear, will not fade or become brittle with time, it is 200 times the strength of glass making it virtually shatter proof.

Sides - Option 3

This is our highest level of build, the playhouse will have a damp proof membrane in the walls, full insulation and flat plywood lined walls on the inside with architrave around the doors and windows and skirting board around the bottom of the walls.

Initially a framework is built using 50mm x 38mm timber. To this we fix on the outside a weatherproof membrane and good quality redwood ship lap using galvanised brads, insulation panels are fitted between the framework before 6mmwbp plywood in fitted as an internal skin, this makes the side panels. Architrave is fitted around the doors and windows and skirting around the bottom of the walls. These panels are then sanded and treated on the outside using two coats of Sadolin wood preservative. These are then fitted together on site, a clear silicon seal is applied to all the corners.

Doors - Standard

All our doors are built with safety as a paramount concern. All are a special non-trap design, using piano hinge down the whole length of the door, and then a rebate on the inside of the hinged side. When the door is in the closed position there is a taper between the door and frame, so should little fingers be left in the way they will not be pinched. Doors are held closed with heavy duty magnets; this prevents a child getting locked in accidentally. The cut out window is glazed with unbreakable 2mm polycarbonate sheet.  Doors have a knob inside and out.

Dimensions

Playhouse internal area: 10ft (304cm) x 6 1/2ft (198cm)

Height to eaves: 6ft (182cm)

Maximum height: 8ft (243cm)

Footprint: 12ft (365cm) x 6 1/2ft (198cm)

 

Colour

Finished in Sadolin superdec: walls and balustrade rails in wild grape; doosr, windows and facia in superwhite.

Accessories

Optional Accessories

Oxo spinners

Shutter Windows